Oil Filter Crushers

The AB-C-6 is the BIG brother to our AB-C-4 as seen below but, on steroids. Designed for Light Diesel Truck and SUV Filters.

A one-piece iron cast crushing chamber with a iron cast door. Tested to withstand 20 tons of force. Will crush filters up to 7" in diameter and 10" tall in seven seconds. Five Year Guarantee. Weight: 250 pounds. Shipped by Truck. The AB-C-6 operates on shop air (125 -175 psi) and has no electrical or hydraulic components, which results in a safe, clean operation. The dimensions are 75"High, 36" Wide, x 26" Deep with the recommended optional stand

:

Pneumatic Automobile Oil Filter Crusher

A one-piece iron cast crushing chamber with an iron cast door.  Tested to withstand 15 tons of force.  Will crush automobile filters up to 6" in diameter and 7" tall in seven seconds.  Can be either wall mounted or mounted on the optional stand.  Five Year Guarantee. Weight:  95 pounds.  Shipped UPS.

Pneumatic Truck Oil Filter Crusher

A 12"x12"x23" tall iron cast crushing chamber that has been tested to withstand 50 tons of force.  Features a 10"x16" steel door and a positive safety switch. Air requirement: 125 to 175 PSI. The Crusher will not operate unless the door is completely closed.  Will crush filters up to 9" in diameter by 17" tall, four automobile filters, or two one-gallon paint cans in 21 seconds.  It delivers up to 10 tons of force.  The Optional Heavy Duty Crusher Stand is highly reconmended (weight 99 lbs.) and a 30 gallon drum can be placed under the stand to receive the draining oil.  Five Year Limited Warranty.  Air Regulator, oiler & lubricator are not needed. Weight:  475 pounds.  Trucked on a pallet.

Automatic Electric Over Hydraulic Oil Filter Crusher with available Stand

A 12"x12"x23" tall iron cast crushing chamber that has been tested to withstand 50 tons of force. Features a 10"x16" steel door and a positive safety switch.  It also has a double pole, single throw kill switch.  The crusher will not operate unless the door is closed. The hydraulic double acting ram, with a 2 1/2" diameter shaft, delivers 25 tons of force.  It is completely automatic, featuring a 110/220 volt electric pump with a two-gallon hydraulic reservoir.  The crushing chamber will accept four automobile filters, one truck filter up to 8" in diameter by 15 1/2" tall, one luberfine filter, or two one-gallon paint cans.  This crusher may be supplied with a heavy duty stand that has its own reservoir as well as storage racks for draining filters prior to crushing.  A 2" N.P.T. port allows connecting drain to other storage containers.  Five Year Limited Warranty.  Weight:  525 pounds.  Trucked on a pallet.

Automotive Filter Crusher Stand for the C-4 and C-6 Crusher, weight 70 lbs. The Heavy Duty Stand for the TT-12 or TT-25EH Filter Crusher  allows your 30 gallon drum to slide under to receive to drain oil or you may route your drain hose to a tank.  Weight:  99 lbs. pounds.