|
TM1's Plug-In Power Supply
The power supply and remote alarm
operates the TM1 tank monitor from 110 volt power. Has its own
sounding piezo buzzer. Converts the TM! battery to stand-by
power. The switch only silences the audible, it does not
effect the power to any of the accessories. This power supply
must be used to power TM1 accessories.
|
TM1'sv Electric Solenoid
Shuts off air to the pump when the
TM1 tank monitor has gone into alarm. Operates on 110 volt
power and up to 175 pounds of air pressure. Optional in-line
air filter available (not shown).
|
TM1'c Power Convertor
Dry contacts with 10 amp rating
switches from normally open and normally closed. Will operate
on alarm mode of the TM1.
Blue wire - common
Yellow wire - normally open
Brown wire - normally closed
|
Strobe
Light
Works off of the TM1's Power
Supply. The bright clear strobe light, visible for up to a
quarter mile, activates when the TM1 is in alarm.
Red wire - positive
Black wire - negative
|
